No Water From Your Well? Well Pump Service in Ortonville, Clarkston, Holly & Fenton
Family-owned · Ortonville-based · Upfront pricing before any work starts
When the Faucets Go Dry
Turning on a faucet and getting nothing, or a few spits of air, is one of the most stressful things that can happen in a home on a private well. No showers, no flushing, no dishes, and sometimes no heat if your boiler depends on water pressure.
Maglothin Well & Water Treatment is a family-owned well company based in Ortonville, serving homeowners in Ortonville, Clarkston, Holly, Fenton and the rest of Oakland, Livingston, and southern Genesee counties. When your water stops, we come out, test the system, and find out why before anything gets replaced.
Common Reasons a Well Stops Producing Water
“No water” has a handful of usual suspects. Some are quick fixes; some mean the pump has to come out of the well. We test so you only pay for the repair you actually need.
- Tripped breaker or blown fuse on the well circuit
- Failed or clogged pressure switch (contacts burned or the small port at the bottom plugged with sediment or iron)
- Waterlogged or failed pressure tank that has worn out the switch or the pump
- Bad control box or capacitor on 3-wire submersible pumps
- Worn-out or seized submersible or jet pump
- Damaged wiring or a split drop pipe down the well
- Frozen or broken water line between the well and the house
- Lightning or power-surge damage after a storm
Safe Things to Check Before You Call
If you’re comfortable doing it safely, these checks can save time. If anything looks burned, wet, or damaged, stop and call us.
- Check the breaker labeled for the well or pump. If it has tripped, reset it once. If it trips again, leave it off and call. Repeated resets can damage the pump motor.
- Look at the pressure gauge near your tank. Note the reading; it helps us diagnose over the phone.
- Listen near the pressure switch and tank. Clicking, humming, or nothing at all are all useful clues.
- If the house lost power recently, note when. Power outages and storms are a common starting point for well trouble.
Please don’t open the control box or pressure switch cover unless you know how to work safely with live 230-volt circuits.
How We Handle a No-Water Call
- You call (248) 974-4026 and tell us what’s happening. Photos of the tank, switch and gauge help.
- We test the system: power at the switch, the switch itself, the tank’s air charge, the control box, and the pump.
- You get the findings in plain language and upfront pricing before any work starts.
- We make the repair. If the pump has to come out, our pump hoist truck makes the pump pull go cleanly.
- We check pressure and cycling before we leave.
Emergency pump service (when available). Regular hours are Monday–Friday, 8 AM–6 PM.
No-Water Service in Ortonville, Clarkston, Holly and Fenton
Ortonville: our home base, with many older wells on larger lots in Brandon and Groveland townships.
Clarkston: Independence and Springfield township homes, including lake neighborhoods, where equipment is often tucked into tight basements.
Holly: Holly, Rose and Groveland township properties, many of them rural lots with longer runs between the well and the house.
Fenton: Fenton Township and lake-area homes around Lake Fenton, Silver Lake and Lake Ponemah, plus Linden and Tyrone Township.
We also cover the rest of Oakland, Livingston, and southern Genesee counties. See our town pages for Clarkston, Holly, Fenton and Howell, or read about well pump & pressure tank repair, sulfur / rotten egg smell and water testing.
Why Homeowners Call Maglothin When the Water Stops
Service guys, not sales guys
We find the real problem and fix what actually needs fixing.
Test first
Sometimes it’s the pump, but often it’s a pressure switch, a control box or a failing tank. We find out before we replace anything.
Local and family-owned
You deal with the same small crew from the first call to the finished job.
Licensed
Michigan-registered well drilling contractor #63-2667.
No Water From Your Well: FAQ
Why do I suddenly have no water from my well?
The most common causes are a tripped breaker, a failed pressure switch, a waterlogged pressure tank, a bad control box, or a worn-out pump. Frozen lines and storm damage also happen. We test each part of the system so you know exactly what failed before anything is replaced.
Should I keep resetting the breaker?
No. Reset it once. If it trips again, leave it off and call us. A breaker that keeps tripping usually means an electrical or motor problem, and repeated resets can make it worse.
Does no water always mean I need a new pump?
No. Many no-water calls turn out to be the pressure switch, the pressure tank, the control box, or wiring. We test the whole system first so you only pay for the repair you actually need.
How much does it cost to fix a well with no water?
It depends on what failed. We diagnose the problem and give you upfront pricing before any work starts, so you know the cost before we do anything.
Need a well, pump, or water treatment pro?
Tell us what’s going on — photos help. We’ll call you back.
Call us: (248) 974-4026
Or call (248) 974-4026
Out of Water? Call Maglothin.
Tell us what’s going on. Photos of your tank, gauge and pressure switch help. We’ll call you back.
(248) 974-4026
Mon–Fri 8 AM–6 PM · Upfront pricing before any work starts